Qui si parla Campagnolo-www.vecchios.com
12-31-1969, 08:00 PM
On Sep 10, 7:33 pm, "Neal" <N...@hotmail.com> wrote:
> I just got a used very low mileage bike with a Shimano Ultegra 10 drive
> train. I noticed the chain is connected opposite of what Shimano
> recommends. The connecting pin is on the trailing part of the link instead
> of the forward position. Is this anything to be concerned about? I have a
> Wipperman connecting link from my Campagnolo 10 setup (not the ultra narrow
> chain). Can this be used with Shimano? This is my first experience with
> Shimano after riding Campy equiped bikes since 1974.
Take the link out that has the shimano pin in it, get a narrow
Wipperman link. The wider one(6.2mm) will work but the proper one will
be more secure.
> I just got a used very low mileage bike with a Shimano Ultegra 10 drive
> train. I noticed the chain is connected opposite of what Shimano
> recommends. The connecting pin is on the trailing part of the link instead
> of the forward position. Is this anything to be concerned about? I have a
> Wipperman connecting link from my Campagnolo 10 setup (not the ultra narrow
> chain). Can this be used with Shimano? This is my first experience with
> Shimano after riding Campy equiped bikes since 1974.
Take the link out that has the shimano pin in it, get a narrow
Wipperman link. The wider one(6.2mm) will work but the proper one will
be more secure.