Lost a Sidi Dominator 3 bolt....

[Scott Gordo]

I've got a pair of Sidi Dominators 3s with plastic straps that hook
into plastic clips. Unfortunately, I lost a bolt that holds one of the
clips in place.

Anybody know where I could find one of these bolts? Anything I could
grab from my local hardware store with the same threading?

Danke!

Scott

[philcycles]

Scott Gordo wrote:
> I've got a pair of Sidi Dominators 3s with plastic straps that hook
> into plastic clips. Unfortunately, I lost a bolt that holds one of the
> clips in place.
>
> Anybody know where I could find one of these bolts? Anything I could
> grab from my local hardware store with the same threading?
>
> Danke!
>
> Scott

Good luck. I would call Veltec and see if they have some screws. they
were the importers at the time. and then it's Loctite. Those screws
were always coming loose.
Phil Brown

[bjw@mambo.ucolick.org]

On Oct 1, 6:55 am, Scott Gordo <blubberp...@gmail.com> wrote:
> I've got a pair of Sidi Dominators 3s with plastic straps that hook
> into plastic clips. Unfortunately, I lost a bolt that holds one of the
> clips in place.
>
> Anybody know where I could find one of these bolts? Anything I could
> grab from my local hardware store with the same threading?

I would ask a shop that sells Sidis, or the importer.
But failing that, I don't have that exact shoe, but on
mine it appears to be a standard 4mm screw, phillips head,
only 4mm long.

Ben

[A Muzi]

Scott Gordo wrote:
> I've got a pair of Sidi Dominators 3s with plastic straps that hook
> into plastic clips. Unfortunately, I lost a bolt that holds one of the
> clips in place.
>
> Anybody know where I could find one of these bolts? Anything I could
> grab from my local hardware store with the same threading?

Yes, standard metric screw at any SiDi dealer or hardware store.
(bring the other one with you)
--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971

[Artoi]

In article <1191252268.657372.66450@g4g2000hsf.googlegroups.co m>,
philcycles <philcycles@gmail.com> wrote:

> Good luck. I would call Veltec and see if they have some screws. they
> were the importers at the time. and then it's Loctite. Those screws
> were always coming loose.
> Phil Brown

Also the pin that anchor the plastic flip up piece. Watch it before it
drops off.
--