Painting Question

[ken hovanes]

I would like to get my LiteSpeed painted, and I was looking for
suggestions from those of you who may have had a custom paint job done
in the past. Any recommendations?

Thanks,

Ken Hovanes

[David Horwitt]

ken hovanes wrote:
> I would like to get my LiteSpeed painted, and I was looking for
> suggestions from those of you who may have had a custom paint job done
> in the past. Any recommendations?
>
> Thanks,
>
> Ken Hovanes
CyclArt, in the San Diego area. Not especially cheap, but good
work.

www.cyclart.com

DH

[mark]

ken hovanes wrote:
> I would like to get my LiteSpeed painted, and I was looking for
> suggestions from those of you who may have had a custom paint job done
> in the past. Any recommendations?
>
> Thanks,
>
> Ken Hovanes

Joe Bell Bicycle Refinishing, > http://www.campyonly.com/joebell.html.

Not cheap, but he did a beautiful job on my tourer.

mark

[marian.rosenberg@gmail.com]

On Nov 30, 5:32 am, ken hovanes <ken.hova...@gmail.com> wrote:
> I would like to get my LiteSpeed painted, and I was looking for
> suggestions from those of you who may have had a custom paint job done
> in the past. Any recommendations?

Litespeeds are ti, right?

http://www.mrtitanium.com/

-M

[It's Chris]

If you got the money, CyclArt is the "Chip Foose" of bike painting.

http://www.cyclart.com/

- -
Compliments of:
"Your Friendly Neighborhood Wheelman"

If you want to E-mail me use:
ChrisZCorner "at" webtv "dot" net

My website:
http://geocities.com/czcorner

[ilaboo]

bring it to auto body painting shop

tell them when they have a imron paint job ( of your color imron is a
flexible paint from dupont--chatulue it) ask them to paint it

hth

peter

<marian.rosenberg@gmail.com> wrote in message
news:789fb18a-5c5e-4c79-ae9f-5c92f501d389@s8g2000prg.googlegroups.com...
> On Nov 30, 5:32 am, ken hovanes <ken.hova...@gmail.com> wrote:
>> I would like to get my LiteSpeed painted, and I was looking for
>> suggestions from those of you who may have had a custom paint job done
>> in the past. Any recommendations?
>
> Litespeeds are ti, right?
>
> http://www.mrtitanium.com/
>
> -M

[Grolsch]

"ilaboo" <plener2@verizon.net> wrote in message
news:hH99j.792$1X.309@trndny07...
> bring it to auto body painting shop
>
> tell them when they have a imron paint job ( of your color imron is a
> flexible paint from dupont--chatulue it) ask them to paint it

Imron or Endura or Awlgrip, these are polyester urethanes that are in fact
extremely tough. I would take it to a shope specializing in bike and
motorbike frames. The flat panels of most vehicles don't give a sprayman the
experience it takes to do finer work on a frame. For pure durability I'd go
with fusion bonded urethane (powder coat) there are many shops around and
the finish is almost always flawless if the place is well run.



>
> hth
>
> peter
>
> <marian.rosenberg@gmail.com> wrote in message
> news:789fb18a-5c5e-4c79-ae9f-5c92f501d389@s8g2000prg.googlegroups.com...
>> On Nov 30, 5:32 am, ken hovanes <ken.hova...@gmail.com> wrote:
>>> I would like to get my LiteSpeed painted, and I was looking for
>>> suggestions from those of you who may have had a custom paint job done
>>> in the past. Any recommendations?
>>
>> Litespeeds are ti, right?
>>
>> http://www.mrtitanium.com/
>>
>> -M
>
>