Adding a second ring under the chainguard of a 5 speed

[meb]

Looks as if there is space to add a granny chainring and fder under the
chainguard from the pedal system of a 5 speed Currie Electric Cruiser.
This is essentially a 5 speed Schwinn cruiser with Currie supplied
electric system (the electric drive is to a left side cog, the pedal
drive is conventional 5 speed right side).
It looks as if I can clear the chainstay with ring.

Anyone ever attempted to put an extra ring while keeping the chainguard
on, and if so was the effort successful, and were there any unexpected
pitfalls?


--
meb

[nmp]

meb wrote:

> Looks as if there is space to add a granny chainring and fder under the
> chainguard from the pedal system of a 5 speed Currie Electric Cruiser.
> This is essentially a 5 speed Schwinn cruiser with Currie supplied
> electric system (the electric drive is to a left side cog, the pedal
> drive is conventional 5 speed right side). It looks as if I can clear
> the chainstay with ring.
>
> Anyone ever attempted to put an extra ring while keeping the chainguard
> on, and if so was the effort successful, and were there any unexpected
> pitfalls?

Either the front derailleur will fit under the chainguard , such that
it is also protected by it, or the chainguard has a bit taken out of the
top where the derailleur goes, or you could always try adapt the chain
guard yourself. Various "designs" are possible. If you cut, saw, file,
whatever very *nicely* it may (or may not...) come out looking as good as
factory made.

Mine did not and I could not care less (frankenstein-bike).

Install derailleur first, then see what needs to be done.



Like this, for instance:
<http://www.gazelle.nl/nl/imagebank/fietsen/2008_medeo_plus_d_617_popup.jpg>

[meb]

nmp Wrote:
> meb wrote:
>
> > Looks as if there is space to add a granny chainring and fder under
> the
> > chainguard from the pedal system of a 5 speed Currie Electric
> Cruiser.
> > This is essentially a 5 speed Schwinn cruiser with Currie supplied
> > electric system (the electric drive is to a left side cog, the pedal
> > drive is conventional 5 speed right side). It looks as if I can
> clear
> > the chainstay with ring.
> >
> > Anyone ever attempted to put an extra ring while keeping the
> chainguard
> > on, and if so was the effort successful, and were there any
> unexpected
> > pitfalls?
>
> Either the front derailleur will fit under the chainguard , such
> that
> it is also protected by it, or the chainguard has a bit taken out of
> the
> top where the derailleur goes, or you could always try adapt the chain
> guard yourself. Various "designs" are possible. If you cut, saw, file,
> whatever very *nicely* it may (or may not...) come out looking as good
> as
> factory made.
>
> Mine did not and I could not care less (frankenstein-bike).
>
> Install derailleur first, then see what needs to be done.
>
>
>
> Like this, for instance:
> <http://www.gazelle.nl/nl/imagebank/fietsen/2008_medeo_plus_d_617_popup.jpg>

Is that a plexiglass chainguard? Looks cool, is there a source for
clear chainguards?

For this particular application, if I have to do major cosmetic
impacting cutting, I'll probably just swap out the
rder/shifter/freewheel for an 11/34 7 speed system. The electrics make
it a 56 lb. bike, so getting some more climbing capacity would help.
Higher ratios might a benefit if I can get aerobars to work on cruiser.


--
meb

[nmp]

meb wrote:

> nmp Wrote:

[..]

>> Like this, for instance:
>> <http://www.gazelle.nl/nl/imagebank/fietsen/2008_medeo_plus_d_617_popup.jpg>
>
> Is that a plexiglass chainguard?

Transparent ABS, I think.

> Looks cool, is there a source for clear chainguards?

Nearly every bikeshop in my country has several styles and sizes of
chainguards, don't know about where you live.

> For this particular application, if I have to do major cosmetic
> impacting cutting,

It's really not major work, and it's only just a chain guard after all.
But you have to decide that for yourself of course.

> I'll probably just swap out the
> rder/shifter/freewheel for an 11/34 7 speed system. The electrics make
> it a 56 lb. bike, so getting some more climbing capacity would help.
> Higher ratios might a benefit if I can get aerobars to work on cruiser.

An electric 25kg bike with aerobars? Please post pictures when you are
ready with that! ;)

Could be a fast thing, too. Or does the electric assist cut out above a
certain speed, like the law demands in the EU? (25km/h)

[meb]

nmp Wrote:
> meb wrote:
>
> > nmp Wrote:
>
> [..]
>
> >> Like this, for instance:
> >>
> <http://www.gazelle.nl/nl/imagebank/fietsen/2008_medeo_plus_d_617_popup.jpg>
> >
> > Is that a plexiglass chainguard?
>
> Transparent ABS, I think.
>
> > Looks cool, is there a source for clear chainguards?
>
> Nearly every bikeshop in my country has several styles and sizes of
> chainguards, don't know about where you live.
>
> > For this particular application, if I have to do major cosmetic
> > impacting cutting,
>
> It's really not major work, and it's only just a chain guard after
> all.
> But you have to decide that for yourself of course.
>
> > I'll probably just swap out the
> > rder/shifter/freewheel for an 11/34 7 speed system. The electrics
> make
> > it a 56 lb. bike, so getting some more climbing capacity would help.
> > Higher ratios might a benefit if I can get aerobars to work on
> cruiser.
>
> An electric 25kg bike with aerobars? Please post pictures when you are
> ready with that! ;)
>
> Could be a fast thing, too. Or does the electric assist cut out above
> a
> certain speed, like the law demands in the EU? (25km/h)

Most US jurisdictions dictate a 20 mph limit, so this system has the
electric motor freewheeling above 18 mph even at full throttle, and
above 16 mph, it barely supplies any assist. So aerobars would be used
in a pedal only mode-besides the thumb throttle would be out of reach on
the areobars unless I wired in a second throttle in parallel.


--
meb